TL16C2550IRHBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TL16C2550 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C2550IRHBG4 Overview
UART is available in the cost-effective 32-VFQFN Exposed Pad package.Transmission uses 2, DUART channels.Packaging is based on Tray.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As part of its configuration, it uses 32 terminations.In order for it to operate, a voltage of 5V must be provided.At present, this electronic part has a status of Active.As a means of transferring data, there are 2 serial I/Os.The mount can be accessed via the Surface Mount method.This device operates at 1.8V~5V.Electronic devices such as this are known as 32-pin integrated circuits.Its clock frequency is measured at 24MHz.This item is classified as Serial IO/Communication Controllers due to a number of similarities.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.The configuration relies on the 32 pins.Several characteristics of Internal Oscillator are present in it.UART is mounted in the way of Surface Mount.Its high-efficiency operation relies on a voltage of 5V.Additionally, it can perform ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ.This part has a base part number of TL16C2550.The supply current of 1.5mA is an allowable maximum value.
TL16C2550IRHBG4 Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550IRHBG4 Applications
There are a lot of Texas Instruments TL16C2550IRHBG4 UARTs applications.
- Factory Automation and Process Controls
- Multimedia Systems
- Cellular Phones DataPort
- Remote Access Servers
- Factory Automation
- Universal PCI Bus Add-in Card
- Factory automation and process control
- Telecommunication Network Routers
- Battery Operated Electronics
- Network Management
