TL16C554AIPNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C554 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C554AIPNR Overview
The 80-LQFP package is the most cost-effective.The transmission of information is carried out through 4, QUART channels.As for packaging, Tape & Reel (TR) is chosen.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.80 terminations are used as parts of its configuration.The supply voltage of 3.3V is provided for its operation.As of right now, this electronic part is in a Active status.A total of 4 serial I/Os are used to communicate data.The mount can be accessed via the Surface Mount method.During operation, the supply voltage is set to 3V~5.25V.In this case, the electronic device is a type of integrated circuit with 80 pins.Its clock frequency is measured at 16MHz.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The 80 pins are at the core of the device's configuration.Using Surface Mount, it is mounted.In order for the device to operate efficiently, 5V is the supply voltage.There is a default setting for the base part number of the part to be TL16C554.50mA is the maximum value of the supply current.
TL16C554AIPNR Features
4 serial I/Os
Clock frequency of 16MHz
Operating supply voltage of 5V
TL16C554AIPNR Applications
There are a lot of Texas Instruments TL16C554AIPNR UARTs applications.
- Factory Automation and Process Controls
- Router C ontrol
- Ethernet Network Routers
- Universal PCI Bus Add-in Card
- Domestic Applications
- GPS Systems
- Cellular Phones DataPort
- Factory automation and process control
- Remote Access Servers
- Portable Appliances
