TL331KDBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TL331 |
| Pin Count | 5 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 700μA |
| Output Current | 20mA |
| Max Supply Current | 700μA |
| Quiescent Current | 700μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL331KDBVRG4 Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.Ready for shipping in Tape & Reel (TR) package.The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.This is a typical comparator of type Differential .There are a total of 1 elements in it.A total of 5 pins are included.The recommended mounting method is Surface Mount .A temperature setting of -40°C~105°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 5 .You can search TL331 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 700μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 700μA in order to use the device normally.A supply current exceeding 700μA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.Electronic comparator is possible to input up to 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .Comparator electronics is acceptable to pack the device by TR .
TL331KDBVRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 700μA
Voltage Gain: 106.02dB
TL331KDBVRG4 Applications
There are a lot of Texas Instruments TL331KDBVRG4 linear comparators applications.
- Analog front end
- Point of load regulators
- Security Detection Systems
- RC Timers
- Ultra-Low Power Systems
- Lithium ion battery monitoring
- Set Top Boxes
- Mobile Communications
- High-Speed Differential Line Receiver
- Window Comparators
