TL5001ACDRG4

8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TL5001ACDRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 112
Description: 8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Base Part Number	TL5001
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	50V
Output Type	Transistor Driver
Max Output Current	3A
Operating Supply Voltage	40V
Input Voltage-Nom	6V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20mA
Voltage - Supply (Vcc/Vdd)	3.6V~40V
Quiescent Current	1.1mA
Control Features	Dead Time Control, Frequency Control
Max Output Voltage	50V
Topology	Buck, Boost, Flyback
Min Input Voltage	3.6V
Control Mode	VOLTAGE-MODE
Frequency - Switching	20kHz~500kHz
Max Input Voltage	40V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	1V
Switcher Configuration	SINGLE
Max Frequency	500kHz
Duty Cycle (Max)	100%
Height	1.58mm
Length	4.9mm
Width	3.91mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-20°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)

TL5001ACDRG4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 3.6V~40V. Suitable for work in a -20°C~85°C TA dc switcher. The switching controller can be switched at 20kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 6V. TL5001 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 8. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 50V voltage according to the test statistics. normally, the dc dc regulator's output current is 20mA, which you should keep in mind when starting a project. DC regulator has a maximum frequency of 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. DC switchings that are dormant use 1.1mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 40V. A voltage of 3.6V must be present in the supply. In this case, the dc switcher won't produce more than 3A watts of output current. As per its datasheet, the switching converter has a maximum output of 50V volts. Lowest voltage output of the voltage controller must be greater than 1V.