TL7733BCP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TL7733 |
| Output | Complementary |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3.6V |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 3.5mA |
| Adjustable Threshold | YES |
| Quiescent Current | 1.8mA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 270 ns Typical Propagation Delay |
| Min Reset Threshold Voltage | 3.03V |
| Max Reset Threshold Voltage | 3.13V |
| Threshold Voltage | 3.08 |
| Undervoltage Threshold | 3.08V |
| Overvoltage Threshold | 3.13V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL7733BCP Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.6V. The maximum supply voltage (Vsup) is not to exceed 18V volts in this IC management. In this case, Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. In order to maintain a stable supply current for the power management, 1.8mA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. If you want to search for similar IC managements of this manufacturer, you can always refer to TL7733, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 3.5mA.
TL7733BCP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7733BCP Applications
There are a lot of Texas Instruments TL7733BCP Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Precision measurement
- Multi-voltage system
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Military communications
- Transformer load monitoring equipment
- Digitally controlled LDO regulators circuit
- Telecommunications equipment
- Unattended substation automation
