TLC2254CN

50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2254 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC2254CN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 984
Description: 50mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 8V 4.4V~16V ±2.2V~8V TLC2254 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	0°C~70°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Base Part Number	TLC2254
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Circuits	4
Operating Supply Current	160μA
Nominal Supply Current	250μA
Output Current	50mA
Slew Rate	0.12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4.4V~16V ±2.2V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	200μV
Bandwidth	200 kHz
Gain Bandwidth Product	210kHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	200 kHz
Voltage Gain	124.61dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	200 kHz
Max I/O Voltage	1.5mV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC2254CN Overview

In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 14 pins. Regarding input offset voltage, buffer amplifier rates 200μV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. An 160μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 124.61dB. A instrumentation amplifier like this has 4 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS? corresponds to linear amplifier's series.