TLC271BIP
| Parameters | |
|---|---|
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC271 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.7MHz |
TLC271BIP Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Op amp rates 2mV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 950μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 87.23dB. As a whole, there are 1 elements that make up this buffer amplifier. LinCMOS? corresponds to linear amplifier's series.
TLC271BIP Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC271BIP Applications
There are a lot of Texas Instruments TLC271BIP Instrumentational OP Amps applications.
- Proportional counter tubes
- Large motor controllers
- Industrial applications including automation
- Communication device
- Voltage regulation circuit
- Weighing systems
- earphone
- Automatic control
- Video amplifiers
- Exponential operation circuits
