TLC320AD545IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Data/Fax |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLC320 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 11.025 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Power Consumption | 120mW |
| Analog Input Voltage-Max | 3V |
| Signal to Noise Ratio (SNR) | 80 dB |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 1 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 80 / 80 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 80 / 78 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC320AD545IPT Overview
For space-saving reasons, it is supplied in a 48-LQFP package. The packaging way of Tray is adopted. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Data/Fax. It uses a mounting type of Surface Mount. Operating performance at -40°C~85°C makes it possible to operate normally. It is integrated with 1 / 1 ADCs / DACs. 4.5V~5.5V of supply voltage are applied to the analog circuit. There is a supply voltage of 4.5V~5.5V provided to the digital circuit. To prevent signals from reflecting off of the transmission line, there are 48 terminations. This device consists of a row of 48-pins. There are 48 pins on it. Find more related parts by using its base part number TLC320. In order for the supply voltage to be maintained at 5.5V, it should be set to its maximum value. It is classified under the subcategory of Codecs. A minimum supply voltage of 3V should be maintained. It operates with the supply voltage of 3.3V. Operating voltage of 5V is possible. The data transmission channel count is 1. In order to store information, 16 bits are provided. It is equipped with 1 analog inputs. It is recommended not to exceed 3V for analog input voltage.
TLC320AD545IPT Features
Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 analog inputs
TLC320AD545IPT Applications
There are a lot of Texas Instruments TLC320AD545IPT CODECs Interface ICs applications.
- Ball screw positioning
- Wind turbines
- Linear measurement
- CT and MRI scanning machinery
- Missing value imputation
- Multiplication
- Chemical dosing pumps
- Medical industry
- Registration mark timing
- High-performance memory systems
