TLC339CDBR
| Parameters | |
|---|---|
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 100μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 100μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Output Current | 20mA |
TLC339CDBR Overview
A convenient packaging is provided in the form of 14-SSOP (0.209, 5.30mm Width) .A comparator with an output type of CMOS, Open-Drain is being used.The part is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .This is a 4 element comparator.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.You can search TLC339 if you are looking for more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 80μA when using the device.If the current supply exceeds 80μA , the comparator might be damaged.A power supply of 5V is sufficient for the operation of the device.The part belongs to the LinCMOS? series of comparator parts.
TLC339CDBR Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
TLC339CDBR Applications
There are a lot of Texas Instruments TLC339CDBR linear comparators applications.
- Window Comparators, Multivibrators
- Alarm and Monitoring Circuits
- Mobile Phones
- Battery-Powered Electronics
- Wearable Devices
- Wireless Base Stations
- Power management
- Body Control Modules
- Automatic Test Equipment
- Portable and Battery-Powered Systems
