TLC339IDRG4
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 125μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
TLC339IDRG4 Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Open-Drain is being used.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 4 elements in total.The device contains 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 14 pins on the comparator.You may wish to search TLC339 for more solutions that address your specific needs.In this comparator, the quiescent current is 125μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 80μA .A supply current exceeding 80μA may result in the comparator malfunctioning.A power supply of 5V is sufficient for the operation of the device.A maximum current of 5pA can be supplied to the device.Comparator electronics is part of the LinCMOS? comparator series.The operating supply voltage for normal operation should be 5V .Packed in TR , this device is for general uses (often in ADC circuits).
TLC339IDRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA
TLC339IDRG4 Applications
There are a lot of Texas Instruments TLC339IDRG4 linear comparators applications.
- Power management
- Self-diagnostics
- Analog front end
- Mobile Communications
- Lithium ion battery monitoring
- Set Top Boxes
- Infotainment and Clusters
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
