Parameters |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
3V |
Power Dissipation-Max |
525mW |
Nominal Supply Current |
40μA |
Power Dissipation |
525mW |
Max Supply Current |
40μA |
Current - Output |
20mA |
Propagation Delay |
4.5 μs |
Quiescent Current |
50μA |
Response Time |
4.5 μs |
Common Mode Rejection Ratio |
84 dB |
Current - Input Bias |
600pA |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
84dB |
Max Input Current |
5pA |
Length |
4.4mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
8 |
Weight |
39.008944mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
TLC393CPWG4 Overview
In order to make transportation easier, it is packaged in TSSOP .You can find 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .The device is equipped with 8 pins.8 pins are present on the comparator.There is 50μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 40μA .A supply current exceeding 40μA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.You are allowed to input a maximum current of 5pA into the device.There is no recommendation for temperatures higher than 70°C .Temperature lower than 0°C is not suitable for the it.A comparator is designed to operate at a maximum supply voltage of 16V .This comparator can be supplied with a voltage as low as 3V .2 channels cooperate together to maintain the output quality.The operating supply voltage for normal operation should be 5V .A 20mA output current is specified for this device.
TLC393CPWG4 Features
General Purpose IC
Quiescent Current: 50μA
TLC393CPWG4 Applications
There are a lot of Texas Instruments TLC393CPWG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Portable and Battery-Powered Systems
- Automatic Test Equipment
- Power management
- Infotainment & cluster
- Self-diagnostics
- Threshold Detectors
- Wearable Devices
- Point of load regulators