TLC5916IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 2 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916IPWR Overview
On the board, there is also a 16-TSSOP (0.173, 4.40mm Width) package that saves space.As part of the design of this LED driver, there are 8 outputs that have been used.It is mounted using Surface Mount.In this case, it emerges as a Linear with a high efficiency.It is possible for the led driver ic to function normally at -40°C~125°C TA.There are considerable benefits for Signage.In this case, the termination value is 16.To form its configuration, there are 16 pins.There are estimated to be 2 segments.This LED driver has the part number TLC5916.Ideally, the supply voltage should be 5.5V.There is 20V voltage output from it.It consists of 16 pins.Additionally, it is categorized into Display Drivers according to its characteristics.The minimal input voltage is 3V.It achieves maximum efficiency with a minimal voltage supply of 3V.5.5V is the maximum value of supply current that can be used.As long as the maximum supply current is less than 22mA, this device is capable of providing high efficiency.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.Even when operating at a maximal output current of 120mA, it is capable of delivering all the benefits of a LED driver.
TLC5916IPWR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5916IPWR Applications
There are a lot of Texas Instruments TLC5916IPWR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Architectural lighting
- Constant Voltage Power Source for portable equipment
- Stage Lighting and Signage
- Gallery lighting
- Down lighting
- Street lighting
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for portable equipment
