TLC5921DAPG4
| Parameters | |
|---|---|
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | -300mV |
| Max Input Voltage | 7V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 20MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5921 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
TLC5921DAPG4 Overview
Its 32-PowerTSSOP (0.240, 6.10mm Width) package is used to save board space. A LED driver with 16 outputs is designed.To mount, use Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.At -20°C~85°C TA, the led driver is capable of operating.The operation of this system is supported by 32 terminations.This LED driver is configured with a base of 32 pins.A total of 16 segments are estimated.Surface Mount has been mounted with the device.The base part number for this LED driver is TLC5921.Ideally, the supply voltage should be 5.5V.This device has an output voltage of 17V volts.In this device, there are 32 pins.Depending on its characteristics, it is classified into Display Drivers.The input voltage must be minimally -300mV.For maximum efficiency, it requires a minimal supply voltage of 4.5V.In terms of supply current, 7V is the maximum value.A minimal supply current is required in order for this device to provide high efficiency.Loads can only be powered by 80mA current.The power of systems depends on having 5V voltages inside.This electronic component may perform its functions fully if the switching frequency is maintained at 20MHz.
TLC5921DAPG4 Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 20MHz
TLC5921DAPG4 Applications
There are a lot of Texas Instruments TLC5921DAPG4 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Constant Voltage Power Source for portable equipment
- Stage and Studio lighting
- Medical surgery lighting
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- Refrigeration lighting
- Flicker-free LED Lighting using R1580N
- Museum lighting
