TLC5921DAPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Base Part Number | TLC5921 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 20 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5921DAPRG4 Overview
As a result of its 32-PowerTSSOP (0.240, 6.10mm Width) package, it helps to save board space on the board. This LED driver has 16 outputs.Surface Mount is used for mounting.In this case, the result is a Linear with high efficiency.The led light driver operates normally at -20°C~85°C TA. Based on the frequency of 20MHz, it operates.In this case, there are 32 terminations.There are 32 pins on its base.It is possible for undetermined failures to occur if the voltage supply falls below 4.5V.The segment count is 16.Surface Mount has been mounted with the device.It's under the TLC5921 base part number.5.5V is an acceptable maximum value for the supply voltage.The voltage output by it is 17V.In addition, it has 32 pins.Moreover, it can be classified as Display Drivers due to its characteristics.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.The device can deliver high efficiency when the maximal supply current is less than 50mA.The current that can be supplied to the load is 80mA.In order for systems to function, a voltage of 0 is required internally.
TLC5921DAPRG4 Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5921DAPRG4 Applications
There are a lot of Texas Instruments TLC5921DAPRG4 LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lights
- Amusement Machines
- Industrial LED Lighting: Image Recognition Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
