TLC5922DAPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight, Lighting, Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5922 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
| Max Supply Current | 65mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 80mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5922DAPR Overview
32-PowerTSSOP (0.240, 6.10mm Width) saves board space. A LED driver with 16 outputs is designed.It is possible to mount the led driver using Surface Mount.The system emerges as a Linear with high efficiency.The led light driver is capable of working normally at -20°C~85°C TA.There are many benefits for Backlight, Lighting, Signage.On the basis of the frequency 30MHz, it operates.The system operates with a termination of 0.The LED light driver has a base configuration of 32 pins.The segment count is 16.It can be found under the part number TLC5922.It is acceptable to have a maximum voltage of 5.5V.There is 17V voltage output from this device.There are 32 pins on it.Furthermore, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 3V.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.The allowable maximum value of supply current reaches 5.5V.When the maximum supply current is less than 65mA, this device is able to provide high efficiency.There is no current available to supply to the load.
TLC5922DAPR Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5922DAPR Applications
There are a lot of Texas Instruments TLC5922DAPR LED Driver ICs applications.
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Scanners and Handy Terminals
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
