TLC5927IPWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5927 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.9W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5927IPWPR Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. For the design of these LED drivers, 16 outputs are used.The led driver mounting is done by using Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.Signage provides many benefits.It operates with 24 terminations.It is configured with 24 pins as its base.A total of 16 segments are estimated.Under the base part number TLC5927, you will find this LED driver.It is acceptable for the supply voltage to be 5.5V.This device produces a voltage of 17V volts.24 pins are used on the device.It is also classified into Display Drivers according to its characteristics.It operates with the minimal input voltage of 3V.It achieves maximum efficiency with a minimal voltage supply of 3V.It is possible to supply current up to 5.5V.It is possible to provide high efficiency when the maximal supply current is less than 20mA.The current that can be supplied to the load is 120mA.When the switching frequency is maintained at 30MHz, this electronic component is able to fully play its functions.
TLC5927IPWPR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5927IPWPR Applications
There are a lot of Texas Instruments TLC5927IPWPR LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED headlights
- Stage and Studio lighting
- General lighting
- Refrigeration lighting
- Amusement Machines
- Street lighting
- High-end retail lighting
