TLC59283RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 35MHz |
| Base Part Number | TLC59283 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11mA |
| Output Current | 35mA |
| Max Supply Current | 2mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 45mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59283RGER Overview
Save board space with 24-VFQFN Exposed Pad package. For the design of this LED driver, 16 outputs are used.Surface Mount is used for mounting.In this case, the Linear emerges as highly efficient and reliable.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The system operates at a frequency of 35MHz.For its operation, terminations with a value of 0 are used.Its configuration is based on 24 pins.A voltage supply below 3V may cause undetermined failures.16 segments exist.This is mounted by Surface Mount.LED drivers have a base part number of TLC59283.In this case, 5.5V is acceptable.There is 10V voltage output from this device.Furthermore, it can be classified as Display Drivers based on its characteristics.To meet highest efficiency standards, it works on a supply voltage of 3V.With a minimum supply current less than 2mA, this device achieves high efficiency.There is no current that can be supplied to the load.
TLC59283RGER Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC59283RGER Applications
There are a lot of Texas Instruments TLC59283RGER LED Driver ICs applications.
- LED headlights
- Stage Lighting and Signage
- Architectural lighting
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- Panel lighting
- Museum lighting
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
