TLC5940PWPRG4
| Parameters | |
|---|---|
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5940 |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Output Current | 120mA |
| Max Supply Current | 60mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1.2mm |
TLC5940PWPRG4 Overview
It saves board space with the 28-PowerTSSOP (0.173, 4.40mm Width) package. In this case, mounting method is Surface Mount.With high reliability and efficiency, this emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~85°C TA.It provides considerable benefits for Backlight.In this case, the frequency is 30MHz.In this case, the terminations are set to 28.There are 28 pins on the base of this LED driver.Based on our estimates, there are 16 segments.Under the base part number TLC5940, you'll find this LED driver.It's acceptable for the voltage to be 5.5V.In this device, the output voltage is 17V volts.28 pins are on the device.In addition, it can be classified as Display Drivers according to its characteristics.As its minimal input voltage, it operates at 3V.To meet high efficiency standards, it works with a voltage of 3V.Currently, the supply current can only reach 5.5V.As long as the supply current is less than 60mA, this device can provide high efficiency.120mA is the maximum current the load can handle.
TLC5940PWPRG4 Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5940PWPRG4 Applications
There are a lot of Texas Instruments TLC5940PWPRG4 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- OLED power supply for portable equipment
- Sports Facility Lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
