TLC5951DAPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.101W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5951 |
| Pin Count | 38 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 55mA |
| Power Dissipation | 3.101W |
| Output Current | 40mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 33 MHz |
| Number of Segments | 24 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5951DAPR Overview
There is a 38-PowerTSSOP (0.240, 6.10mm Width) package on the board that is used to save space. The LED driver's design uses 24 outputs.As a mounting method, Surface Mount is used.It emergys as a Linear with high efficiency and reliable performance.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Signage.Based on the frequency of 30MHz, it operates.It operates with terminations of 38.This LED driver is configured with a base of 38 pins.We estimate that there are 24 segments.It can be found under the part number TLC5951.It is acceptable to operate with a supply voltage of 5.5V.It has a voltage output of 15V.38 pins are on the device.As a result, its characteristics can also be categorized as Display Drivers.A minimal input voltage of 3V is required for it to operate.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.5.5V is the maximum value of the supply current.40mA is the maximum current the load can handle.
TLC5951DAPR Features
Available in the 38-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5951DAPR Applications
There are a lot of Texas Instruments TLC5951DAPR LED Driver ICs applications.
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Other Electronic Devices
- Street lighting
- Portable lighting
- Auxiliary lights for on-vehicle cameras
- Architectural lighting
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
