TLC5951RHAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.139W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 30MHz |
| Base Part Number | TLC5951 |
| Pin Count | 40 |
| Number of Outputs | 24 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 55mA |
| Power Dissipation | 2.139W |
| Output Current | 40mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 33 MHz |
| Number of Segments | 24 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5951RHAR Overview
There is a 40-VFQFN Exposed Pad package on the board that is used to save space. In this LED driver, there are 24 outputs.To mount, use Surface Mount.It emergys as a Linear with high efficiency and reliable performance.It is capable of operating at a temperature of -40°C~85°C TA. Signage provides many benefits.The frequency of 30MHz is used as the basis for its operation.40 terminations are used in its operation.This LED driver is configured with a base of 40 pins.There are estimated to be 24 segments.This LED driver can be found under the base part number TLC5951.An acceptable maximum value for the supply voltage is 5.5V.A voltage of 15V is produced by it.On it, there are 40 pins.In addition, a Display Drivers is assigned based on the characteristics of the object.A minimal input voltage of 3V is required for it to operate.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.When the maximum supply current is allowed, it reaches 5.5V.It is possible to supply the load with 40mA current.
TLC5951RHAR Features
Available in the 40-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5951RHAR Applications
There are a lot of Texas Instruments TLC5951RHAR LED Driver ICs applications.
- Down lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Industrial LED Lighting: Image Recognition Devices
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- Replacement lamps
- OLED power supply for portable equipment
- Stage Lighting and Signage
- LED headlights
