TLC5971PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.121W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 12MHz |
| Base Part Number | TLC5971 |
| Pin Count | 20 |
| Number of Outputs | 12 |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 36mA |
| Power Dissipation | 3.121W |
| Output Current | 60mA |
| Max Supply Current | 4mA |
| Topology | Shift Register |
| Min Input Voltage | 6V |
| Max Input Voltage | 17V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 12 |
| Switching Frequency | 12MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5971PWPR Overview
To save board space, it uses the 20-PowerTSSOP (0.173, 4.40mm Width) package. A LED driver with 12 outputs is designed.It is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.It is capable of operating at a temperature of -40°C~85°C TA. A frequency of 12MHz is used to operate it.There are 20 terminations that are designed to operate with it.A configuration of this chip is made up of 20 pins.Undetermined failures will occur if the voltage supply is less than 3V.The number of segments is 12.Part number TLC5971 represents this LED driver.It's acceptable for the voltage to be 17V.There are 20 pins on it.There is an optimization that allows a maximum supply voltage of 5.5V.As a result, it can also be classified as Display Drivers.The input voltage must be minimally 6V.The maximum efficiency can be achieved by operating it at a minimal voltage of 6V.There is 17V maximum value for supply current.When the maximum supply current is less than 4mA, this device is capable of providing high efficiency.The current that can be supplied to the load is 60mA.This electronic component may perform its functions fully if the switching frequency is maintained at 12MHz.
TLC5971PWPR Features
Available in the 20-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 12MHz
Supply voltage of 12V
Switching frequency of 12MHz
TLC5971PWPR Applications
There are a lot of Texas Instruments TLC5971PWPR LED Driver ICs applications.
- Down lights
- Sports Facility Lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- White LED Backlight for portable equipment
- Amusement Machines
- General lighting
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Panel lighting
