TLC5971RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.106W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 12MHz |
| Base Part Number | TLC5971 |
| Pin Count | 24 |
| Number of Outputs | 12 |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 36mA |
| Power Dissipation | 3.106W |
| Output Current | 60mA |
| Max Supply Current | 4mA |
| Topology | Shift Register |
| Min Input Voltage | 6V |
| Max Input Voltage | 17V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Number of Segments | 12 |
| Switching Frequency | 20MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5971RGET Overview
On the board, there is also a 24-VFQFN Exposed Pad package that saves space.LED drivers have a total of 12 outputs that are used in the design of the drivers.Surface Mount is used for mounting.It is highly performing and reliable when it emerges as a Linear.It is capable of operating at a temperature of -40°C~85°C TA. In the 12MHz frequency range, it operates.In order for it to operate, it has 24 terminations.With 24 pins at the base, this LED driver has a base configuration.There may be undetermined failures if the voltage supply falls below 3V.There are 12 segments.LED drivers can be found under the base part number TLC5971.It's acceptable for the voltage to be 17V.There are 24 pins on this device.There is a maximum value of 5.5V supply voltage supported by this device. Furthermore, it can be classified as Display Drivers based on its characteristics.With 6V as the minimal input voltage, it operates.The maximum efficiency can be achieved by operating it at a minimal voltage of 6V.17V is the maximum value of supply current that can be used.It is capable of delivering high efficiency when the maximal supply current is below 4mA.You can supply 60mA current to the load.As long as the switching frequency is maintained at 20MHz, this electronic component is able to perform all of its functions properly.
TLC5971RGET Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 12MHz
Supply voltage of 12V
Switching frequency of 20MHz
TLC5971RGET Applications
There are a lot of Texas Instruments TLC5971RGET LED Driver ICs applications.
- Refrigeration lighting
- LED Lightings for Inspection Devices
- Amusement Machines
- LED backlight driver for LCD displays for Tablets and Note PCs
- Panel lighting
- Sports Facility Lighting
- Stage and Studio lighting
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
