TLC7135CDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC7135 |
| Pin Count | 28 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5.25V |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Interface | BCD |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 5mW |
| Max Supply Current | 3mA |
| Number of Bits | 14 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 1.75 B |
| Sampling Rate | 3 ksps |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY CODED DECIMAL |
| Power Consumption | 5mW |
| Linearity Error-Max (EL) | 0.005% |
| Display Type | LED, LCD |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Dual Supply Voltage | 5V |
| Analog Input Voltage-Max | 6V |
| Output Format | PARALLEL, 4 BITS |
| Negative Supply Voltage-Nom | -5V |
| Max Supply Voltage (DC) | 6V |
| Min Supply Voltage (DC) | 4V |
| Analog Input Voltage-Min | -7V |
| Digits or Characters | A/D 4.5 Digits |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7135CDW Overview
Tube-like packaging has been used here.The package contains version 28-SOIC (0.295, 7.50mm Width), which includes it.The type of display used in this electrical device is LED, LCD.Mounting this electronic component on the board is done using Surface Mount.Its operating temperature is 0°C~70°C.If you use a 4V~6VV power source, it should work.An impedance-matching device is used to terminate transmission lines using a 28 termination.Display drivers belongs to TLC7135 family.Devices are made up entirely of 28 pins.The board is equipped with 28-pins.Display drivers is powered from a supply voltage of 5V.In order for 1mA to perform its full function, a supply current needs to be provided for it.The same can also be done with Analog to Digital Converters.A high level of efficiency can be achieved by maintaining the supply voltage at 5.25V.In this case, 3mA is the maximum amount of current that can be supplied for its operation.5V's output voltage is determined by this device.ADC, DUAL-SLOPE converters are based on the voltage at the input and output of the source in order to convert the voltage.In the electromagnetic spectrum, there are 1 analog In channels, which mean the bandwidth that is available.An electronic part of this design was made using 14 Bits.There are basically four elements that make up a 1 element.
TLC7135CDW Features
28-SOIC (0.295, 7.50mm Width) package
TLC7135 family
28 pin count
28 pins
ADC, DUAL-SLOPE converters
1 elements
TLC7135CDW Applications
There are a lot of Texas Instruments TLC7135CDW display drivers applications.
- Instrumentation
- Instrument Clusters
- Battery Operated Applications
- DC Plasma Displays
- Bar Graphs and Matrix Displays
- Bargraph Dlsplays
- Climate Controls
- Battery Operated Products
- General-purpose displays
- Driving low-voltag fluorescent displays
