TLC7135CDWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC7135 |
| Pin Count | 28 |
| Operating Supply Voltage | 5.25V |
| Polarity | Bipolar |
| Power Supplies | +-5V |
| Interface | BCD |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 5mW |
| Number of Bits | 14 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 1.75 B |
| Sampling Rate | 3 ksps |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY CODED DECIMAL |
| Power Consumption | 5mW |
| Linearity Error-Max (EL) | 0.005% |
| Display Type | LED, LCD |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Number of A/D Converters | 1 |
| Analog Input Voltage-Max | 6V |
| Output Format | PARALLEL, 4 BITS |
| Negative Supply Voltage-Nom | -5V |
| Max Supply Voltage (DC) | 6V |
| Min Supply Voltage (DC) | 4V |
| Analog Input Voltage-Min | -7V |
| Digits or Characters | A/D 4.5 Digits |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7135CDWRG4 Overview
As with Tape & Reel (TR), the package has been designed similarly.A package with version 28-SOIC (0.295, 7.50mm Width) includes it.Its display type is LED, LCD.This electronic part is mounted in the way of Surface Mount.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.Display drivers should be possible to operate Display drivers wDisplay driversh a 4V~6VV power source.An impedance-matching device is used to terminate transmission lines using a 28 termination.One of the members of the TLC7135 family of devices is this device.Display drivers is equipped wDisplay driversh 28 pin count.The board is equipped with 28-pins.Powered by a voltage of 5V, it is powered by a supply voltage of V.There is a need to supply 1mA with the necessary supply current for it to function at full capacity.Additionally, it can be incorporated into Analog to Digital Converters.In order to achieve a high efficiency level, it is essential that the supply voltage is kept at 5.25V.Two +-5V power supplies enable it to be used anywhere in the world.The source input voltage and the output voltage are used to determine ADC, DUAL-SLOPE converters.There are 1 analog In channels, which mean bandwidth in the electromagnetic spectrum capable of carrying one 1 standard television signal that is delivered in an analog format.Electronic parts such as this one were designed with 14 Bits.
TLC7135CDWRG4 Features
28-SOIC (0.295, 7.50mm Width) package
TLC7135 family
28 pin count
28 pins
+-5V power supplies
ADC, DUAL-SLOPE converters
TLC7135CDWRG4 Applications
There are a lot of Texas Instruments TLC7135CDWRG4 display drivers applications.
- Appliance control panels
- Industrial Display
- Bar Graphs and Matrix Displays
- Driving common-cathode LED displays
- Battery Operated Products
- High and Low Temperature Envlronment s where LCD
- Healthcare Products
- DC Plasma Displays
- Metering
- Set-Top Boxes
