TLC7701QPWR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7701 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 1.04V |
| Max Reset Threshold Voltage | 1.16V |
| Threshold Voltage | +1.1V |
| Overvoltage Threshold | 1.16V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
TLC7701QPWR Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-TSSOP (0.173, 4.40mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 2.7V volt supply. IC management conducts in a 1-voltage supply. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. This power management system has 8 pins. IC management can only work with a supply voltage of 2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 9μA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7701, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 16μA.
TLC7701QPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7701QPWR Applications
There are a lot of Texas Instruments TLC7701QPWR Voltage Supervisors applications.
- Rechargeable batteries
- Power distribution systems of ICU
- Display equipment
- Detection of phase imbalance
- Personal computers
- Electronics installed in the vehicle
- Power distribution systems of infant care room
- Battery-powered equipment
- Sensitive sensors
- Leakage protection
