TLC7733IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER-ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 525mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC7733 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 525mW |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1.1ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC7733IPWR Overview
A total of 8 terminals are used to mount this power management. There is a Cut Tape (CT)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for 8-TSSOP (0.173, 4.40mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using TLC7733, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.
TLC7733IPWR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLC7733IPWR Applications
There are a lot of Texas Instruments TLC7733IPWR Voltage Supervisors applications.
- Electrical fire monitoring system
- Functional modules
- Insulation fault location system
- Rechargeable batteries
- Embedded computing
- Refrigeration
- Sensitive sensors
- Smart meter
- Electronics installed in the vehicle
- Unattended substation automation
