TLE2021QDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2021 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-2/+-20/4/40V |
| Number of Circuits | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 300μA |
| Slew Rate | 0.65V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1700 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Max I/O Voltage | 600μV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2021QDREP Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. The input offset voltage is 120μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You can run this op amp ic on 200μA . There should be no change in the voltage gain at 123.52dB. In total, there are 1 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 20V. This linear amplifier pack is based on the TR axis. As the name implies, Excalibur? refers to the series of the buffer op amp.
TLE2021QDREP Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2021QDREP Applications
There are a lot of Texas Instruments TLE2021QDREP Instrumentational OP Amps applications.
- High input resistance broadband
- Automotive sensors
- Addition operation circuits
- Test equipment
- Portable electronic products powered by batteries
- Signal operation
- Large motor controllers
- Multiplication circuits
- Ultrasound transducers
- Medical instruments
