TLE2082IDG4.
| Parameters | |
|---|---|
| Current - Input Bias | 175pA |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 9.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.000175μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 19V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 2.25V |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 7mV |
| Input Offset Current-Max (IIO) | 0.00095μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Power Supplies | +-5/+-15V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Power Dissipation | 725mW |
| Current - Output | 48mA |
| Slew Rate | 35 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
TLE2082IDG4. Overview
The linear amplifier is packaged in a SOIC case. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. The case in which buffer amplifier is delivered is called a Rail/Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 7mV. This op amp can operate from a supply current at 3.1mA. Keeping the voltage gain at 106dB is the best course of action. A linear amplifier like this has 2 circuits on it. Using this buffer op amp requires a temperature of at least -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 19V voltage. You should conduct this electronic component under the dual supply voltage of 19V.
TLE2082IDG4. Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082IDG4. Applications
There are a lot of Texas Instruments TLE2082IDG4. Instrumentational OP Amps applications.
- Medical imaging
- Mobile phone
- Strain gauges
- High input resistance broadband
- Test equipment
- Power control
- Power generator
- Measurements of Wheatstone bridge
- RF cable systems
- MP3
