TLE2161AIDR
| Parameters | |
|---|---|
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2161 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Circuits | 1 |
| Operating Supply Current | 290μA |
| Nominal Supply Current | 35μA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~18V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 6.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6400 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=5 |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 2.6mV |
| Power | NO |
TLE2161AIDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A J-FET-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. The input offset voltage is 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 290μA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 98.06dB's 98.06dB family. This op amp ic has 1 circuits. The operating supply voltage of instrumentation amplifier is rated 18V voltage. As a result of this, the buffer amplifier is packed in TR. In this case, Excalibur? represents the instrumentation amplifiers' series number.
TLE2161AIDR Features
8 Pins
supply voltage of 15V
98.06dB voltage gain
TLE2161AIDR Applications
There are a lot of Texas Instruments TLE2161AIDR Instrumentational OP Amps applications.
- High speed sample
- Blood pressure sensors
- Active probe
- Signal amplification
- Semiconductor detectors
- Signal filtering
- ECG equipment
- Medical instruments
- Differentiator circuits
- Instrumentation
