TLE4242GATMA2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TO-263 |
| Number of Pins | 7 |
| Weight | 1.59999g |
| Packaging | Cut Tape |
| JESD-609 Code | e3 |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SEATED HT-CALCULATED |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Max Supply Voltage | 42V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 500mA |
| Current - Output | 500mA |
| Max Output Voltage | 40V |
| Voltage - Output | 40V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 42V |
| Interface IC Type | LED DISPLAY DRIVER |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 13.5V |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TLE4242GATMA2 Overview
To save space on the board, it has a TO-263 package. In this case, the termination value is 7.Its configuration is based on 7 pins.The number of segments is estimated to be 3.There is a mounting of it by Surface Mount.The supply voltage of 42V is an acceptable maximum value.40V is the output voltage.It operates at a voltage of 4.5V as its minimal input voltage.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.Currently, the supply current can only reach 42V.When the maximum supply current is below 500mA, the device can deliver high efficiency.In order to ensure stable operation, the operating temperature should not exceed 150°C.For stable operation, the operating temperature should be higher than -40°C.When operating at the maximum output current of 500mA, it is capable of providing all the benefits associated with LED drivers.The interface IC for this part is marked with the LED DISPLAY DRIVER.Voltages should not exceed 40V volts at the output.Ensure that the part output current is 500mA.There are 1 transmission channels available.This LED driver is also characterized by the number SEATED HT-CALCULATED.
TLE4242GATMA2 Features
Available in the TO-263 package
Supply voltage of 13.5V
SEATED HT-CALCULATED
TLE4242GATMA2 Applications
There are a lot of Infineon Technologies TLE4242GATMA2 LED Driver ICs applications.
- Down lighting
- A- lamps
- Amusement Machines
- Down lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Industrial Equipment
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Constant Voltage Power Source for portable equipment
