TLE4727
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~110°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 5V~16V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLE4727 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 16V |
| Power Supplies | 6/18V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 800mA |
| Logic Function | AND |
| Voltage - Load | 5V~16V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 4.2mm |
| Length | 25.3mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TLE4727 Overview
The design contains a Tubepackage.A 20-DIP (0.300, 7.62mm)case is included with the part.In most cases, it is recommended to mount the part at Through Hole.In this case, it is appropriate for the component connected to General Purpose.This device is capable of supplying voltages up to 5V~16V volts.A range of -40°C~110°C TAis available for operating temperature.The motor type can be classified as Brushed DC.In this part, there are 20 terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.There is Through Hole recommended mounting method for this device.Maintain the current output of the part at 800mA volts.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.The TLE4727part number is used to locate the part.A device with 20pins is available.Drivers controllers belongs to the Motion Control Electronics series.
TLE4727 Features
Applications : General Purpose
Load voltage across the chip 5V~16V
base on TLE4727 number
TLE4727 Applications
There are a lot of Infineon Technologies TLE4727 motor drivers applications.
- Daytime running lights (DRLs)
- PDAs
- Home lighting systems
- Camera-enabled smartphones
- Human-centric lighting
- Running preventive- maintenance diagnostics
- Brake lights
- Footwell lighting
- CHMSL (center high-mount stop lamps)
- Charge pump circuits
