TLE82422LXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Current Source |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Channels | 8 |
| Max Supply Voltage | 42V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Input | 5.5V~42V |
| Quiescent Current | 5mA |
| Halogen Free | Halogen Free |
| Sensing Method | Low-Side |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE82422LXUMA2 Overview
The package includes buck boost converter in version Tape & Reel (TR).A package in the way of 64-LQFP is used for voltage regulator.Mounted by Surface Mount, this current regulator is a semiconductor.There should be no temperature above -40°C~150°C at the time of operation.Current regulator is possible to use a voltage input of 5.5V~42V for the input.The 64 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.There are 64 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. It is mounted by Surface Mount on this current regulator.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.The analog IC used by this power converter is called ANALOG CIRCUIT.Channels are becoming stronger/weaker based on the following statistics: 8.42V's maximum supply voltage can be supported by this buck boost converter.A voltage greater than 4.75V should be applied to the supply (Vsup).In spite of external influences, it consumes 5mA of quiescent current regardless of the environment.
TLE82422LXUMA2 Features
Tape & Reel (TR) package
The maximal supply voltage of 42V
TLE82422LXUMA2 Applications
There are a lot of Infineon Technologies TLE82422LXUMA2 Current Regulation/Managements applications.
- Over-current protection
- Industrial applications current measurement
- Transmission controls
- Smart battery packs
- Current sensing
- Over current monitor
- DC-to-dc converters
- Over current monitor
- Battery management
- Motor controls
