TLV2262AIDR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2262 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 2 |
| Operating Supply Current | 400μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 725mW |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 950μV |
| Bandwidth | 670 kHz |
| Gain Bandwidth Product | 710kHz |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 950μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
TLV2262AIDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 950μV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . A supply current of 400μA can be used to operate this linear amplifier. The voltage gain should stay at 114.81dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 4V. For packing the buffer amplifier, the TR-axis is adopted. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLV2262AIDR Features
8 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2262AIDR Applications
There are a lot of Texas Instruments TLV2262AIDR Instrumentational OP Amps applications.
- Oscilloscopes
- Multimedia playback equipment
- Automation control systems
- Image computer boards
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
- Vehicle electronics
- Voltage regulation circuit
- Cinema or auditorium audio system
- High speed sample
