TLV2302IDGKG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Filter |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 481mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2302 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 481mW |
| Max Supply Current | 1.7μA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 88 dB |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Input Bias Current | 500pA |
| Wideband | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2302IDGKG4 Overview
In order to house this item, we are using a Tube package.A very good Amplifier, Comparator that comes at a very good price and offers excellent value for money.8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package includes this item.Surface Mount-mounting involves mounting the part; it's a process that involves mounting.Filter is its primary use.It is important to note that TLV2302 is the base part number for this device.The 2 functions here are used to access high performance for the purpose of amplification.In total, there are 8 terminals, each of which has a different function to perform.When proceeding peak relow for the part, the iron temperature should be controlled under 260.It is worth noting that there are a total of two 8 pins on this part.It is recommended to supply this amplifier with a voltage of 2.7V in order for it to run properly.Custom 8-pin amplifier.A device can operate at a temperature as low as -40°C.The fact that this part is capable of running at temperatures as high as 125°C is impressive.It has been adapted to enhance design flexibility by incorporating Surface Mount.Like any other good-quality Operational Amplifier amplifier, this one provides a marvellous amount of amplifying power.The maximum supply voltage that it is rated for is 16V.A minimum of 2.5V power should be provided with this product.In order to achieve the best performance on this video processing device, 2 channels have been combined.Voltage gain of 120dB is excellent on this amplifier.
TLV2302IDGKG4 Features
TLV2302IDGKG4 Applications
There are a lot of Texas Instruments TLV2302IDGKG4 Special Purpose Amplifiers applications.
- Multiplication and division circuits
- PDA
- Portable electronic products powered by batteries
- Instrumentation
- Car stereo
- Integrator and differentiator circuits
- Band-pass filter
- Test equipment
- High input resistance broadband
- Switching amplifier
