TLV2404IDR
| Parameters | |
|---|---|
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2404 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Number of Channels | 4 |
| Operating Supply Current | 900nA |
| Nominal Supply Current | 3.96μA |
| Power Dissipation | 1.022W |
| Output Current | 200μA |
| Slew Rate | 0.0025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0009μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Voltage - Input Offset | 390μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 1.2mV |
| Input Offset Current-Max (IIO) | 0.00025μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
TLV2404IDR Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. It is estimated that there will be at least 14 terminations this year. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 14-pin op amp ic is included in the package. The input offset voltage is 1.2mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 900nA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 120dB is the best course of action. 4 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The linear amplifier is packaged by using a TR axis.
TLV2404IDR Features
14 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2404IDR Applications
There are a lot of Texas Instruments TLV2404IDR Instrumentational OP Amps applications.
- Proportional counter tubes
- High input resistance broadband
- Fission chambers
- Large motor controllers
- Tablets
- Division circuits
- Signal filtering
- Medical instruments
- Cinema or auditorium audio system
- Communication
