Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV2462 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Circuits |
2 |
Operating Supply Current |
550μA |
Nominal Supply Current |
575μA |
Output Current |
80mA |
Slew Rate |
1.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
66 dB |
Current - Input Bias |
1.3nA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V ±1.35V~3V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
6.4MHz |
Unity Gain BW-Nom |
6400 kHz |
Voltage Gain |
109dB |
Average Bias Current-Max (IIB) |
0.075μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.014μA |
Programmable Power |
NO |
Max I/O Voltage |
1.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.007μA |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2462AQPWRG4 Overview
The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. The input offset voltage is 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 550μA . Op amp is a member of the 109dB's 109dB family. There are 2 circuits on this op amp. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 3V. The linear amplifier is packaged by using a TR axis.
TLV2462AQPWRG4 Features
8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2462AQPWRG4 Applications
There are a lot of Texas Instruments TLV2462AQPWRG4 Instrumentational OP Amps applications.
- Gaming industry
- Proportional counter tubes
- Information processing
- Test and measurement instruments
- Hand-held batteries
- Automatic control
- Scintillation detectors
- Digital cameras
- High gain DC amplifier
- Vehicle electronics