TLV2462IDGKR

2 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2462IDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 367
Description: 2 Channels 80mA per Channel 1.3nA 66 dB Instrumentational OP Amps 0.075μA 3V 2.7V~6V ±1.35V~3V TLV2462 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV2462
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	2
Operating Supply Current	550μA
Nominal Supply Current	1.3mA
Power Dissipation	481mW
Output Current	80mA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	66 dB
Current - Input Bias	1.3nA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Bandwidth	6.4MHz
Unity Gain BW-Nom	6400 kHz
Voltage Gain	109dB
Average Bias Current-Max (IIB)	0.075μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	500μV
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.014μA
Programmable Power	NO
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.007μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2462IDGKR Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 550μA. Maintain 109dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 3V voltage. An buffer amplifier is packed in a TR-shape according to the design.