TLV2475CN

35mA per Channel 2.5pA 64 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2475 16 Pins 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2475CN
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 863
Description: 35mA per Channel 2.5pA 64 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2475 16 Pins 16-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 20 hours ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	3V
Base Part Number	TLV2475
Pin Count	16
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	4
Power Supplies	+-1.35/+-3/2.7/6V
Operating Supply Current	600μA
Nominal Supply Current	3.6mA
Power Dissipation	1.6W
Output Current	35mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	64 dB
Current - Input Bias	2.5pA
Voltage - Supply, Single/Dual (±)	2.7V~6V ±1.35V~3V
Output Current per Channel	35mA
Input Offset Voltage (Vos)	2.2mV
Bandwidth	2.8MHz
Unity Gain BW-Nom	2800 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	2.2mV
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2475CN Overview

A 16-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 16 terminations. Buffer amplifier has a total of 16 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 2.2mV. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 600μA. Maintain 120dB as the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 3V.