TLV2774CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2774 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 725mW |
| Output Current | 50mA |
| Slew Rate | 10.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 5.1MHz |
| Unity Gain BW-Nom | 5100 kHz |
| Voltage Gain | 113.06dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.1MHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2774CDR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. The total number of pins on linear amplifier is 14. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. Op amp rates 2.5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . The voltage gain should stay at 113.06dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of instrumentation amplifier is rated 3V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV2774CDR Features
14 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2774CDR Applications
There are a lot of Texas Instruments TLV2774CDR Instrumentational OP Amps applications.
- Switching amplifier
- Portable docking station
- Navigation
- Subtraction operation circuits
- Television
- High input resistance broadband
- Weighing systems
- Industrial applications including automation
- Computer workstations
- Blood pressure sensors
