TLV320AIC10CPFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC10 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.6V |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 22 ksps |
| Voltage - Supply, Analog | 3V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Power Consumption | 39mW |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of D/A Converters | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Dynamic Range, ADCs / DACs (db) Typ | 82 / 82 |
| S/N Ratio, ADCs / DACs (db) Typ | 87 / 90 |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC10CPFB Overview
Space-saving reasons have led to it being packaged in a 48-TQFP package. Tray packaging is adopted. In numerous applications, this electronic part can deliver high-efficiency performance as a type of General Purpose. As far as mounting types are concerned, it uses Surface Mount. Using 0°C~70°C as the operating performance allows it to operate normally. It features 1 / 1 ADCs / DACs. An analog circuit is supplied with a voltage of 3V~5.5V. It receives a voltage of 3V~5.5V as its supply voltage. Signals are prevented from reflecting off the end of transmission lines by 48 terminations. There are 48 pins on this device. It has a configuration of 48 pins. Its base part number TLV320AIC10 can be used to find more related items. It is recommended to maintain the maximum supply voltage at 5.5V. Supply voltage should be maintained at 3V. Powered by a 3.6V supply voltage, it can run. For the conversion of digital signals into analog ones, 1 D/A converters are used. In order to store information, 16 bits are provided. A total of 2 analog inputs are available.
TLV320AIC10CPFB Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
2 analog inputs
TLV320AIC10CPFB Applications
There are a lot of Texas Instruments TLV320AIC10CPFB CODECs Interface ICs applications.
- Material handling
- Subtraction
- Speed measurement
- Anomaly detection
- X-Y positioning
- Wire number reduction in a particular circuits
- Linear measurement
- Textile manufacturing
- Position measurement
- CPU memory location identification
