TLV320AIC13CDBTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 30 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT ALSO REQUIRES 3.3V ANALOG SUPPLY |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Output | VOLTAGE |
| Pin Count | 30 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Input Type | SINGLE-ENDED/DIFF |
| Resolution | 2 B |
| Sampling Rate | 104 ksps |
| Number of A/D Converters | 1 |
| Telecom IC Type | PROGRAMMABLE CODEC |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Filter | YES |
| Output Code | TWOS COMPLEMENT |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV320AIC13CDBTG4 Overview
For space-saving reasons, it is supplied in a TSSOP package. To prevent signals from reflecting off of the transmission line, there are 30 terminations. It is a kind of 30-pin electronic device. The board has 30 pins configured. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 1.95V. As a result of analog signals being converted into digital signals, there are 1 A/D converters. A part in this category is classified as subcategory Codecs. 1.65V should be the minimum value of supply voltage. It operates with the supply voltage of 1.8V. It is set to the maximum value of 70°C so normal use can be maintained. For normal operation, the operating temperature must be set at 0°C at least. There are 2 channels for transmitting data on it. A characteristic of it is that it has IT ALSO REQUIRES 3.3V ANALOG SUPPLY. 2V is the maximum voltage that should be allowed for an analog input.
TLV320AIC13CDBTG4 Features
Embedded in the TSSOP package
1 A/D converters
IT ALSO REQUIRES 3.3V ANALOG SUPPLY
TLV320AIC13CDBTG4 Applications
There are a lot of Texas Instruments TLV320AIC13CDBTG4 CODECs Interface ICs applications.
- Spooling or level wind
- CT and MRI scanning machinery
- Electronics industry
- Position measurement
- Dynamic applications
- Wire number reduction in a particular circuits
- Linear measurement
- Mobile equipement
- Ships navigation
- Advanced breast cancer treatments
