banner_page

TLV320AIC14IDBTR

TLV320AIC14IDBTR datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV320AIC14IDBTR
  • Package: 30-TFSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 521
  • Description: TLV320AIC14IDBTR datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 30-TFSOP (0.173, 4.40mm Width)
Number of Pins 30
Weight 97.49401mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 30
Type Voice-Band
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Codecs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number TLV320AIC14
Output VOLTAGE
Pin Count 30
Qualification Status Not Qualified
Number of Channels 2
Interface 2-Wire, I2C, I2S, Serial
Max Supply Voltage 1.95V
Min Supply Voltage 1.65V
Operating Mode SYNCHRONOUS
Data Interface Serial
Sampling Rate 104 ksps
Voltage - Supply, Analog 2.7V~3.6V
Voltage - Supply, Digital 1.65V~1.95V
Number of A/D Converters 1
Output Voltage-Max 2.35V
Analog Input Voltage-Max 2V
Signal to Noise Ratio (SNR) 87 dB
Resolution (Bits) 16 b
Sigma Delta Yes
Number of ADCs / DACs 1 / 1
Filter YES
Dynamic Range, ADCs / DACs (db) Typ 85 / 92
Output Code TWOS COMPLEMENT
S/N Ratio, ADCs / DACs (db) Typ 84 / 92
Input Code TWOS COMPLEMENT
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV320AIC14IDBTR Overview


For space-saving purposes, it is packaged in 30-TFSOP (0.173, 4.40mm Width). It is adopted to package in the Tape & Reel (TR) way. It can perform highly efficiently in various applications since it is a type of Voice-Band. A mounting type of Surface Mount is used for this device. It is able to operate normally when the operating performance is set at -40°C~85°C. In addition, it is equipped with 1 / 1 ADCs and DACs. The analog circuit is provided with the supply voltage of 2.7V~3.6V. It is supplied with a voltage of 1.65V~1.95V to power the digital circuit. To prevent signals from reflecting off of the transmission line, there are 30 terminations. Essentially, it is an electronic device with 30 pins. The board has 30 pins configured. Its base part number TLV320AIC14 can be used to find other parts that are related. Using the Surface Mount technology, it is mounted to a PCB. 1.95V should be the maximum value of the supply voltage. Analog signals are converted into digital signals by A/D converters. Electronic parts classified as Codecs are located in this subcategory. The minimum value of supply voltage should be maintained at 1.65V. The supply voltage is set to 1.8V. It is designed with 2 channels for data transmission. It is not recommended that the analog input voltage exceeds 2V.

TLV320AIC14IDBTR Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC14IDBTR Applications


There are a lot of Texas Instruments TLV320AIC14IDBTR CODECs Interface ICs applications.

  • High-performance memory system
  • Stagecraft
  • Missing value imputation
  • Textiles
  • Linear measurement
  • High-performance memory-decoding or data-routing applications
  • Timber products
  • CPU memory location identification
  • Chemical dosing pumps
  • Rotating radar platforms

Write a review

Note: HTML is not translated!
    Bad           Good