TLV320AIC15IDBTRG4
| Parameters | |
|---|---|
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV320AIC15 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Interface | I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Mode | SYNCHRONOUS |
| Data Interface | Serial |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| Type | Voice-Band |
TLV320AIC15IDBTRG4 Overview
For space-saving reasons, it is supplied in a 30-TFSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) packaging is adopted. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. The mounting type of this device is Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. The unit is integrated with 1 / 1 ADCs / DACs. 2.7V~3.6V of supply voltage are applied to the analog circuit. A 1.65V~1.95V supply voltage is applied to the digital circuit. Transmission lines have 30 terminations to prevent signals from reflecting. Essentially, it is an electronic device with 30 pins. There are 30 pins on this board. Its base part number TLV320AIC15 can be used to find more related parts. It is mounted to a PCB based on the Surface Mount technology. The maximum value of supply voltage should be maintained at 1.95V. Digital signals are converted from analog signals using 1 A/D converters. There is a subcategory of Codecs for this electronic part. It is recommended that the supply voltage is maintained at 1.65V. The supply voltage is set to 1.8V. The data transmission channel count is 2. There should be no voltage greater than 2V on the analog input.
TLV320AIC15IDBTRG4 Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC15IDBTRG4 Applications
There are a lot of Texas Instruments TLV320AIC15IDBTRG4 CODECs Interface ICs applications.
- Material handling
- Aerospace
- Flight simulators
- Position measurement
- X-Y positioning
- Rotating radar platforms
- Linear measurement
- Packaging
- Cut-to-length
- Multiplication
