TLV320AIC20KIPFB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV320AIC20 |
| Pin Count | 48 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 20mW |
| Max Output Power | 250mW |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of ADC Channels | 1 |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 5 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Number of Analog Outputs | 4 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC20KIPFB Overview
For space-saving purposes, it is packaged in 48-TQFP. We have adopted the packaging method of Tray. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Voice-Band. It uses a mounting type of Surface Mount. When the operating performance is set to -40°C~85°C, the system can operate normally. The board is integrated with 2 / 2 ADCs and DACs. The analog circuit receives 2.7V~3.6V as a supply voltage. The digital circuit is provided with the supply voltage of 1.65V~1.95V. Signals are prevented from reflecting off the end of transmission lines by 48 terminations. 48-pin electronic devices are what it is. It is configured with 48 pins. More related parts can be found using its base part number TLV320AIC20. It is recommended to maintain the maximum supply voltage at 3.6V. A part in this category is classified as subcategory Codecs. 1.1V should be the minimum value of supply voltage. There is no supply voltage for it. For the conversion of digital signals into analog ones, 2 D/A converters are used. The storage of information is provided by 16 bits. There are 5 analog inputs on it. It features 4 analog outputs. There should be no voltage greater than 2V on the analog input. An ADC has 1 channels, which indicate the number of analog values that can be read simultaneously.
TLV320AIC20KIPFB Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
5 analog inputs
4 analog outputs
TLV320AIC20KIPFB Applications
There are a lot of Texas Instruments TLV320AIC20KIPFB CODECs Interface ICs applications.
- Robotic arm positioning
- Missing value imputation
- Electronics industry
- Textile manufacturing
- Analog to digital conversion in the analog decoder
- Ball screw positioning
- Applications involving measuring wheels
- Servo motors
- Full adders
- Cut-to-length
