TLV320AIC21CPFBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC21 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLV320AIC21CPFBR Overview
Space-saving reasons have led to it being packaged in a 48-TQFP package. As a packaging method, Tape & Reel (TR) is adopted. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of Voice-Band. Surface Mount is the mounting type employed by this device. When the operating performance is set to 0°C~70°C, the system can operate normally. The unit is integrated with 2 / 2 ADCs / DACs. A supply voltage of 2.7V~3.6V is applied to the analog circuit. A supply voltage of 1.65V~1.95V is applied to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. This device consists of a row of 48-pins. The board is configured with 48 pins. The base part number TLV320AIC21 can be used to find related parts. Mounted on a PCB based on the technology of Surface Mount. In order for the supply voltage to be maintained at 3.6V, it should be set to its maximum value. In order to convert analog signals into digital signals, 2 A/D converters are used. The electronic part has been classified as Codecs. Maintaining a minimum voltage of 1.1V is recommended. A voltage of 1.8V is required to operate the device. The power supply for this device is 1.83.3V. Data transmission is achieved through 2 channels. It should not be possible to exceed 2V for the analog input voltage.
TLV320AIC21CPFBR Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC21CPFBR Applications
There are a lot of Texas Instruments TLV320AIC21CPFBR CODECs Interface ICs applications.
- Speed synchronization of multiple motors in industries
- Motor feedback
- Code conversion
- Cut-to-length
- Electronics industry
- Metal forming & fabrication
- Robotic arms
- High-performance memory-decoding or data-routing applications
- Timber products
- Converting
