TLV320AIC24CPFBRG4
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC24 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
TLV320AIC24CPFBRG4 Overview
As a space saver, it comes in the 48-TQFP package. Tape & Reel (TR) packaging is adopted. As a type of Voice-Band, this electronic part is able to deliver high-efficient performance in various applications. Mounting type Surface Mount is used. When the operating performance is set to 0°C~70°C, it can operate normally. In addition, it is equipped with 2 / 2 ADCs and DACs. There is a voltage supply of 2.7V~3.6V to the analog circuit. It is supplied with a voltage of 1.65V~1.95V to power the digital circuit. 48 terminations prevent signals from reflecting off transmission lines. 48-pin electronic devices are what it is. There are 48 pins on this board. More related parts can be found by using its base part number TLV320AIC24. This device is mounted on a PCB which uses the Surface Mount technology. 3.6V should be the maximum value of the supply voltage. Digital signals are converted from analog signals using 2 A/D converters. Subcategory Codecs describes this electronic part. The minimum value of supply voltage should be maintained at 1.1V. Voltage 1.8V is used for its power supply. Power supplies of 1.83.3V are used. Data transmission is achieved through 2 channels. It is not recommended that the analog input voltage exceeds 2V.
TLV320AIC24CPFBRG4 Features
Embedded in the 48-TQFP package
Operating temperature of 0°C~70°C
2 / 2 ADCs / DACs
2 A/D converters
TLV320AIC24CPFBRG4 Applications
There are a lot of Texas Instruments TLV320AIC24CPFBRG4 CODECs Interface ICs applications.
- Flight simulators
- Conveying
- Digital systems
- X-Y positioning
- Electronics industry
- Data transfer
- Feature extraction
- Robotic arm positioning
- Medical & Lab Equipment
- Analog to digital conversion in the analog decoder
