TLV320AIC24KIPFBR
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV320AIC24 |
| Pin Count | 48 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 20mW |
| Number of A/D Converters | 2 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 16 b |
| Number of Analog Inputs | 5 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Number of Analog Outputs | 3 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
TLV320AIC24KIPFBR Overview
Space-saving reasons have led to it being packaged in a 48-TQFP package. Tape & Reel (TR) packaging method is used. This electronic part is categorized as a type of Voice-Band, making it capable of providing high-efficiency performance in a variety of applications. The mounting type is Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. The board is integrated with 2 / 2 ADCs and DACs. Supply voltage is 2.7V~3.6V for the analog circuit. Supply voltage is set to 1.65V~1.95V for the digital circuit. The transmission line is terminated with 48 terminations to prevent reflection of signals. It is a kind of 48-pin electronic device. The board is configured with 48 pins. The base part number TLV320AIC24 can be used to find related parts. Ideally, the supply voltage should remain at 3.6V. Analog signals are converted to digital signals by means of 2 A/D converters. Electronic parts classified as Codecs are located in this subcategory. It is recommended that the supply voltage is maintained at 1.1V. There is 1.8V supply voltage for this device. It features 5 analog inputs. A total of 3 analog outputs are included. It should not be possible to exceed 2V for the analog input voltage. In this ADC, there are 1 channels, which represent the number of analog values that can be read at once.
TLV320AIC24KIPFBR Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
5 analog inputs
3 analog outputs
TLV320AIC24KIPFBR Applications
There are a lot of Texas Instruments TLV320AIC24KIPFBR CODECs Interface ICs applications.
- Code conversion
- Dimensionality reduction
- Automated Guided Vehicles (AGV)
- Wind turbines
- Timber products
- Radiation therapy
- Demultiplexing
- Sawmills
- Galvanometer scanners
- Robotics vehicle with the metal detector
