TLV320AIC3256IRSBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | PowerTune™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TLV320AIC3256 |
| Pin Count | 40 |
| Operating Supply Voltage | 1.8V |
| Interface | I2C, I2S, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | I²C, Serial, SPI™ |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 1.5V~1.95V |
| Voltage - Supply, Digital | 1.26V~1.95V |
| Power Consumption | 5mW |
| Signal to Noise Ratio (SNR) | 93 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 32 b |
| Number of Analog Inputs | 6 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 93 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 93 / 100 |
| Number of Analog Outputs | 4 |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC3256IRSBT Overview
A 40-WFQFN Exposed Pad package is supplied for space savings. Packaging is done in the form of a Tape & Reel (TR). This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. It uses a mounting type of Surface Mount. When the operating performance is set to -40°C~85°C, it can operate normally. The unit is integrated with 2 / 2 ADCs / DACs. The analog circuit receives 1.5V~1.95V as a supply voltage. Digital circuits are powered by 1.26V~1.95V supply voltages. 40 terminations prevent signals from reflecting off transmission lines. In terms of electronics, it is a 40-pin device. 40 pins are connected to it. The base part number TLV320AIC3256 can be used to find related parts. It is mounted to a PCB based on the Surface Mount technology. Voltage should not exceed 3.6V. Electronic parts classified as Other Consumer ICs are located in this subcategory. Supply voltage should be maintained at 1.1V. It can be operated from a voltage of 1.8V. It is necessary to convert digital signals into analog signals by using 2 D/A converters. The PowerTune? series electronic part is compatible with a wide variety of applications. A total of 6 analog inputs are available. A total of 4 analog outputs are available on the device.
TLV320AIC3256IRSBT Features
Embedded in the 40-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
6 analog inputs
4 analog outputs
TLV320AIC3256IRSBT Applications
There are a lot of Texas Instruments TLV320AIC3256IRSBT CODECs Interface ICs applications.
- Image search
- CPU memory location identification
- Speed measurement
- Autonomous vehicles & robots
- Detecting interrupts in microprocesstor applications
- Filling
- Printing
- Semiconductor fabrication
- Robotics vehicle with the metal detector
- Elevators
