TLV320AIC32IRHBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TLV320AIC32 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, I2C, I2S, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 3.3mA |
| Number of Bits | 24 |
| Data Interface | PCM Audio Interface |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 14mW |
| Max Output Power | 500mW |
| Signal to Noise Ratio (SNR) | 92 dB |
| Resolution (Bits) | 24 b |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 6 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 92 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 92 / 100 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC32IRHBTG4 Overview
Space-saving is achieved by supplying it in the 32-VFQFN Exposed Pad package. This package uses the Tape & Reel (TR) packaging method. Due to the fact that this part is of the type Stereo Audio, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type is Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. 2 / 2 ADC / DAC is integrated into it. The analog circuit is powered by 2.7V~3.6V. A supply voltage of 1.65V~1.95V is applied to the digital circuit. 32 terminations prevent signals from reflecting off transmission lines. Essentially, it is an electronic device with 32 pins. There are 32 pins on it. By using its base part number TLV320AIC32, you can find more related parts. Voltage should not exceed 3.6V. Electronic parts classified as Other Consumer ICs are located in this subcategory. It is recommended to maintain a voltage of 2.7V as the minimum value. It is able to operate from the supply voltage of 3.3V. Information is stored with 24 bits. There are 6 analog inputs on it. A normal electrical current of 3.3mA should flow through the circuit at all times. An analog output can be sampled from a numerical value by 2 DAC channels.
TLV320AIC32IRHBTG4 Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
6 analog inputs
TLV320AIC32IRHBTG4 Applications
There are a lot of Texas Instruments TLV320AIC32IRHBTG4 CODECs Interface ICs applications.
- CPU memory location identification
- Material handling
- Dynamic applications
- Motor speed /RPM readout
- Motor feedback
- Automatic health monitoring systems
- Medical industry
- Logical circuits
- Half adders
- Stagecraft
