TLV3402ID
| Parameters | |
|---|---|
| Nominal Supply Current | 640nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 640nA |
| Propagation Delay | 300 μs |
| Quiescent Current | 950nA |
| Response Time | 175000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 3.6mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 950nA |
| Voltage - Input Offset (Max) | 3.6mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV3402 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
TLV3402ID Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Drain output type for this comparator.As a result, it is designed with Tube package.There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.A total of 2 elements can be found in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 8 pins.Try search TLV3402 to get more pin-to-pin solutions for your special needs.A quiescent current of 950nA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 640nA supply current.The compartator could be damaged if the current supply exceeds 640nA .Electronic comparator is possible to input a maximum of 250pA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 120dB .The operating supply voltage for normal operation should be 15V .
TLV3402ID Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402ID Applications
There are a lot of Texas Instruments TLV3402ID linear comparators applications.
- Security Detection Systems
- Set Top Boxes
- Notebooks and PDAs
- Power Supervision
- Self-diagnostics
- Ultra-Low Power Systems
- Infotainment and Clusters
- General-Purpose, Low-Voltage Applications
- Portable Battery Monitoring
- Metering Systems
